FP2
Select the Following Items
Frequently Asked Questions
- Recent notebook computers don’t have serial ports, but have USB ports only. How do I connect PLCs, such as FP0, FP1, and FP10SH to edit the programs?
- When connecting FP0 to GT30 and conducting a rewriting operation in RUN mode using the “through” function, “NOT SUPPORTED” error occurs. This does not occur when using FP2. Why?
- GT30: Can I switch screens by using both the function switch and programmable controller?
- I’m planning to make a remote I/O system using FP2. Can the FP3 slave units be used for the system?
- I’ll connect a measuring instrument to a serial data unit and send data by non-procedural transmission. Can I use a control signal or parameter-X?
- When the scan time is 1 msec or less, can I use the FP2 I/O mixed units with the ON-pulse catch input function without a periodic interruption program?
- With regard to FP2 positioning, are the home position input and near-home position input based on the edge or level?
- Which is assigned to FP2/FP3 I/O mixed units first, X or Y?
- When connecting FP0 to GT30 and conducting a rewriting operation in RUN mode using the “through” function, “NOT SUPPORTED” error occurs. This does not occur when using FP2. Why?
- Is the F-ROM operation of FP2 available without a backup battery?
- I need to connect three GV52 units and one GT11 unit to the PLC. Which model is recommended?
- Regarding the I/O allocations of FP2, when one 64-input unit, four 16-input units, and five 16-output units are connected to a 14-module type backplane on the CPU side, the first number of the expansion backplane becomes W15. Can it be changed to W13?
